Is the Auto Tuning feature not finding channels on your LG Smart TV? Then, this problem mostly occurs due to improper TV signals.
Basically, the Auto Tuning feature on LG TV will automatically scan programs and live broadcast channels. If that doesn’t work properly, it can delay your LG TV from finding channels. In that case, you can refer to this article to learn about the troubleshooting techniques in detail.
Reasons for LG TV Auto Tuning Not Finding Channels
As mentioned earlier, improper signal strength is the primary cause. There are also other reasons that make the Auto Tuning feature not work properly. They are listed below in this section.
- Improper positioning of Antenna
- Faulty cable connection
- Outdated firmware
- Wrong selection of channel input
How to Fix LG TV Auto Tuning Not Finding Channels
After learning the causes, you can follow the troubleshooting fixes in sequential order to fix the issue in no time.
Check the Coaxial Connection
Any problem with the auto-tuning feature arises due to faulty coaxial cables. So, you have to first check whether the cables are properly insulated. If not, replace them with a new one.
Apart from this, you can also try to unplug the coaxial cables from the ports of the LG TV and wait for at least 5 minutes. After that, re-connect the cable again to the ports and check if the auto-tuning is working better.
Power Cycle LG TV
Power cycling your device fixes every complex problem in a flick. However, limitless usage of the LG TV can occasionally cause the TV to malfunction. To clear out these bugs and glitches, you can try power cycle or restarting your LG TV.
To do that, unplug the TV cable from the power source. Wait at least for 5 to 10 minutes. Then, reconnect the cable again to the power outlet and turn on your LG TV. This can make the auto-tuning feature to find channels easily on LG TV.
Adjust the LG TV Antenna
Sometimes, improper positioning of the antenna is the major reason that makes the auto-tuning not find channels on LG TV. In that case, you can adjust and re-position the LG TV antenna in a good signal-receiving place. With this alternation, the Auto tuning feature on your LG TV regains the ability to find channels.
In case your antenna is physically damaged due to natural calamities, you can directly contact the satellite TV provider to repair it and solve the problem.
Cross Check Signal Strength
In rare cases, heavy environmental disasters are the main reason for the instability of the cable TV signal strength. This can be settled only if the signal strength from the cable/satellite provider is fixed.
If the signal issue is on the cable TV provider’s aerial system, you can contact them to resolve the problem. Otherwise, you must wait until the provider fixes the issue.
Perform Manual Channel Tuning on LG TV
If your TV’s auto-tuner is not working fine, then you can try out manual channel tuning to find the channels. The steps below will guide you to perform the manual channel scan on your LG TV.
1. Press the Settings button on your LG TV remote controller.
2. Then, tap on the All Settings option present on the screen.
3. Now, select General and tap on the Channels option.
4. This directs you to a separate screen where you have to choose the Channel tuning.
5. Click Manual Tuning and choose the Signal Type.
6. Enter the Missing Channel Number in the given space shown on the screen.
7. After finding the right one, hit on the Add option to get it on your LG TV.
Alter the Location on LG TV Settings
Generally, LG TV comes pre-built in location settings to scan the channels based on your region. If you have set up the wrong location on your LG TV, it definitely creates the problem.
Following that, your LG TV fails to find the channels via the auto-tuning feature. So, check and alter the location settings on your LG TV accordingly.
| 2021 WebOS 6.0 or Later | Press Settings on Remote → All Settings → General → System → Location |
| 2020 WebOS 5.0 or Earlier | Press Settings on Remote → All Settings → General → Location |
Update LG TV Firmware
Outdated firmware will slow down the working performance of the LG TV. So, it will be difficult for your LG TV to find the channels. In that case, it is important to update the LG TV firmware at regular intervals.
This removes the unwanted bugs or glitches that are spoiling the working condition and your device rejuvenates with the improved performance.
Factory Reset LG TV
If all the above fixes didn’t help, the final way is you try to factory reset your LG TV. This reset usually deletes all of the stored data and turns your TV to the default mode. But, this process has a high possibility of fixing the Auto Tuning feature not finding channels issue on your LG TV, and your device gradually starts to find channels easily.
Contact LG TV Customer Support
If none of the troubleshooting techniques help resolve the issue, you can contact LG TV’s customer support to fix the problem. If factory resetting doesn’t help, you can only fix it with the assistance of well-trained professionals.
To sum up, I’m sure that implementing the above troubleshooting methods will fix the auto-tuning feature not finding channel problems on LG TV. Thus, you can enjoy streaming your all-time favorite channels worry-free. Do share your feedback on my blog page. You can even raise queries about your doubts and get them clarified without any delay.
