Is your LG TV remote controller’s home button not working properly? Then, you’ve landed at the right place. To avoid technical malfunctions, it is important to clean your LG TV remote frequently. Besides that, you can also try out the other troubleshooting techniques explained in this article to fix the malfunctioning home button on your LG TV remote controller.
Possible Reasons for the LG TV’s Home Button Not Working
I have listed the possible causes so that you can have a keen look at this LG TV problem before initiating the troubleshooting techniques.
- Technical glitches on LG TV
- Accumulated dust and debris
- Pairing issues
- Usage of a dead battery
- Bugs due to outdated firmware
Troubleshooting Techniques to Fix the Not Working Problem
Since the problem is related to the remote buttons, you have to implement the troubleshooting techniques on the remote first. Then, you can try some fixes on your LG TV to make the remote work better.
Check Remote Batteries
The first and foremost thing that you need to check with your LG TV remote is the batteries. Because the batteries should be in good condition for the home button to work properly. This makes your LG TV since the commands and work accordingly.
If that fails, then it is definitely a big problem. So, replace your LG TV remote with the new batteries and verify whether the home button is working properly.
Power Cycle LG TV Remote
Secondarily, you can power cycle your remote to fix the home button not working problem.
- To do that, remove the batteries of the LG TV remote.
- Now, press the power button for about 30-40 seconds.
- Then, insert the batteries again and try to see if the home button is working properly.
Repair LG TV Remote
If you use the LG TV magic remote, the home button fails to respond because of pairing issues. In that case, you can better re-pair your remote with the LG TV. Here are the steps to re-pair your LG TV remote.
- Initially, verify whether the remote is working properly by pressing any of the buttons, such as volume or power.
- Then, long-press the Home button and Back button simultaneously for at least 5 seconds.
- This power button red light flashes, indicating that the remote is being reset.
- Now, release them and press the Wheel/OK button on the remote.
- It displays a message that displays, “Registering New Remote.“
Finally, once repaired, you can press the Home button on your LG Magic remote and ensure it’s working properly.
Examine the IR Sensor of LG TV and Remote
Even after trying all the above fixes related to the remote control, one simple thing can fix this issue within a minute. Examine if there are any objects in between your LG TV and the remote. Because that can block your TV from detecting the signals.
Besides this, you can also check the IR sensor of the LG TV’s remote with the phone’s camera. If you notice a red flash on the remote, then it is in good condition. If not, buy a replacement remote to resolve the problem.
Note: If you notice any physical damage to your LG TV remote, it is better to replace it with a new one.
Power Cycle LG TV
Some software glitches or bugs on your LG TV can cause your device to respond very slowly. At the same time, this can even cause your device to freeze and fail to acknowledge your commands. As a fix, you can try to power cycle your LG TV. This quick revival can fix the issue of the home button not working.
- First, turn off your TV and unplug the cables from the power outlet.
- Wait for at least 5 to 10 minutes, and then plug in the cable to the power source.
- After that, turn on your LG TV using the power button on the TV.
Disable Quick Start+ on LG TV
Basically, the Quick Start+ feature on the LG TV switches your TV into standby mode after turning it off. So that, this helps your TV to work faster until next time. In that case, you can turn it off and see if your LG TV responds to the press of the home button without any ruckus. The steps to disable the Quick Start+ feature are given in this section.
- First, you have to press the Settings button on the LG TV remote and click All Settings.
- Then, select General Settings to proceed with the disabling steps.
- Scroll to toggle off the Quick Start+ feature on your LG Smart TV.
- After this, restart your LG TV and check if the problem is resolved.
Cross-Check Network Settings
In the case of the LG TV Magic remote, the internet connection must be in good condition. If the home button response is slow, cross-check LG TV network settings and see if your device is connected to the internet. And, slight changes in the network settings can be made to fix this.
- Navigate and press the Settings button on the remote and click All Settings.
- Now, you have to select the Network option available on the screen.
- After that, choose Wireless or Wired network and hit on the EDIT option.
- Uncheck the Set Automatically option and edit the DNS Server to 8.8.8.8.
- Then, hit on the CONNECT option to connect with the stable network.
Update LG TV Firmware
Using outdated firmware can also delay the Home button’s response time with your LG TV. It also dumps your TV with inappropriate bugs, and your TV starts to glitch unwantedly. So, it is very much necessary to update the firmware of your LG TV.
Subsequently, your device starts to respond to the home button at the right time. If the issue ain’t solved, then check out the final troubleshooting method.
Factory Reset LG TV
As a final fix, factory reset your LG TV to its default settings. This reset can turn your device to default mode, erasing all of the stored data. But still, it has a high chance of fixing your TV from bugs and errors. Eventually, your device will also work and respond according to the home button usage on the remote.
If the last troubleshooting fix didn’t help, you can contact LG TV customer support to assist you with a better remedy.
Wrapping Up!
As a closure, all the above techniques will resolve the home button not working problem on your LG TV remote. After fixing the issue all by yourself, you can use the remote control to access your desired content easily without any issues.
Further, if you have any questions regarding the fixes, you can open up and raise your doubts on my blog page.
